Member |
 |
| Posts
:
6 |
| Level
:
|
| Tech Points
:
2 |
| From:
Chile |
|
Posted:10/24/2009 10:59:00 PM |
|
Hi everyone,
I have a new Q9650 intel Processor but before to install I need you help about anything forget to configure in BIOS screen.
let me see....
MB rev. 1.xx
Bios :2901 updated
Overclocking: Manual
FSB : 266 (Maximun 333 for this processor?)
Vcore: Auto
Anything else??????....
Please help me, really apreciate...thx
|
|
|
|
VIP Member |
 |
| Posts
:
598 |
| Level
:
|
| Tech Points
:
394 |
| From:
Canada |
|
|
Posted:10/25/2009 12:10:00 AM |
|
What exactly are you trying to achieve?
Are you overclocking the system? If so, what parameters are looking to approach? If your not overclocking the PC leave everything to Auto.
Configure the ram timings however by default the bios will handle that supreme. Check your stick labels for proper timings if the bios is misleading the settings.
Set your defaults for the storage configuration rather to IDE or Raid depending on what your planning to approach for the hard drives.
Enable Plug & Play if you want the operating system to automatically assign the IRQ's.
|
|
|
| RIIE, i7 965, 6GB's 2000Mhz Ram, SLI GTX 295, Panasonic 42" Viera Plasma (G10), X-Fi 5.1 Surround Sound + The Witcher: Enhanced Edition, Maximum Settings, 1920x1080, 16xQ AA, 16xAF = ~ 1 of the best RPG's of all time ~ |
|
|
Member |
|
| Posts
:
6 |
| Level
:
|
| Tech Points
:
2 |
| From:
Chile |
|
|
Posted:10/25/2009 12:39:00 AM |
|
thx for response.
Am not try to overclocking the system I try to install a 45nm cpu in my mobo (p5w dh). thats all
I read in forum, mine motherboard support 45nm cpu but will need downclocking for work fine.
I want to know if parameters in BIOS is correct for work fine this processor in my MOBO or need something else.
|
|
|
|
VIP Member |
|
| Posts
:
598 |
| Level
:
|
| Tech Points
:
394 |
| From:
Canada |
|
|
Posted:10/25/2009 1:09:00 AM |
|
Downclocking is approached when the oveclocked cpu can't handle the stress & heat temperatures.
Your installing a brand new cpu, so you don't have to downclock anything.
|
|
|
| RIIE, i7 965, 6GB's 2000Mhz Ram, SLI GTX 295, Panasonic 42" Viera Plasma (G10), X-Fi 5.1 Surround Sound + The Witcher: Enhanced Edition, Maximum Settings, 1920x1080, 16xQ AA, 16xAF = ~ 1 of the best RPG's of all time ~ |
|
|
Member |
|
| Posts
:
6 |
| Level
:
|
| Tech Points
:
2 |
| From:
Chile |
|
|
Posted:10/25/2009 2:39:00 AM |
|
| But I can install the new cpu with the BIOS configuration show in post 1? or need correct any parameters?
|
|
|
|
VIP Member |
|
| Posts
:
598 |
| Level
:
|
| Tech Points
:
394 |
| From:
Canada |
|
|
Posted:10/25/2009 3:07:00 AM |
|
Make sure the bios has settings to Auto.
Acknowledge what I typed in the first post.
|
|
|
| RIIE, i7 965, 6GB's 2000Mhz Ram, SLI GTX 295, Panasonic 42" Viera Plasma (G10), X-Fi 5.1 Surround Sound + The Witcher: Enhanced Edition, Maximum Settings, 1920x1080, 16xQ AA, 16xAF = ~ 1 of the best RPG's of all time ~ |
|
|
Member |
|
| Posts
:
6 |
| Level
:
|
| Tech Points
:
2 |
| From:
Chile |
|
|
Posted:10/25/2009 9:08:00 AM |
|
sorry men, but i don't understand. You say set to auto everything in BIOS and should not have problem with the FSB or Vcore installing Q9650 in P5W?
Maybe i don't explain very well but if the installing in this MOBO with the CPU Q9550 means set FSB maximun 333 MHZ and I want to set in the same MOBO a powerfull CPU like Q9650 and you say set to Auto....mmmm I just don't know.
Am Really lost.....
FSB=Auto (266*9=2400 mhz)
Thanks anyway.....
|
|
|
|
Moderator |
 |
| Posts
:
33713 |
| Level
:
|
| Tech Points
:
4064 |
| From:
United States |
|
| There are 10 kinds of people in the World...Those who understand binary, and those who dont! |
|
|
Member |
|
| Posts
:
6 |
| Level
:
|
| Tech Points
:
2 |
| From:
Chile |
|
|
Posted:10/25/2009 9:31:00 AM |
|
|
Yes, I konw this limitatios.....Let me see
The following is a list of the limitations:
1. VT function does not work. ( i don't need it VT)
2. The maximum FSB is capped at 1066MHz. (thats is the question. How much FSB I need to downclocking for working fine. Maybe like Q9550 the maximun is 333 mhz. thats is I need to know?)
3. 0.5 CPU multiplier is not supported. (don't care Q9650 multiplier is 9)
4. L2 cache size is not recognized correctly. However L2 cache is still functioning.(still working...am good) |
|
|
|
|
Moderator |
|
| Posts
:
33713 |
| Level
:
|
| Tech Points
:
4064 |
| From:
United States |
|
|
Posted:10/26/2009 6:07:00 AM |
|
Hi M..
I think you posted the proper CPU external Frequency and multiplier 266Mhz X 9
So if your system is running with that processor at 2.4Ghz, then that is correct.
|
|
|
| There are 10 kinds of people in the World...Those who understand binary, and those who dont! |
|
|